LEGO MINDSTORMS Education EV3 Large Motor (Brand New)

$75.00

Quantity:

Share Product:

Product Description:

 

The EV3 Large Servo Motor is a powerful motor that uses tacho feedback for precise control to within one degree of accuracy. By using the built-in rotation sensor, the intelligent motor can be made to align with other motors on the robot so that it can drive in a straight line at the same speed. It can also be used to give an accurate reading for experiments. The motor case design also makes it easy to assemble gear trains.

  • Tacho feedback to one degree of accuracy
  • 160-170 rpm
  • Running torque of 20 N/cm (approximately 30 oz/in.)
  • Stall torque of 40 N/cm (approximately 60 oz/in.)
  • Auto-ID is built into theEV3 Software.

Other Products You May Like

Broadcom BCM2711, 64-bit ARM Cortex-A72 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz, with a metal body for better heat dissipation. LPDDR4 SDRAM: 1GB 2 x USB3.0 Port + 2 x USB2.0 Port Expanded 40-pin GPIO Header Video/Audio Out: 4-pole 3.5mm connector; 2 x micro HDMI port, support 4Kp60 video, dual display Raw LCD (DSI) Image/Camera input: CSI port Storage: MicroSD True Gigabit Ethernet, >900 Mbps Power-over-Ethernet (PoE) support (requires separate PoE HAT) 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE (Bluetooth Low Energy) Power Requirement, 5V/3.0A via USB type C connector. Supports Raspberry Pi OS, and check 3rd party Operating System here. Dimensions: 85mm x 56mm x 17mm
The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 1GB LPDDR2 SDRAM 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps) Extended 40-pin GPIO header Full-size HDMI® 4 USB 2.0 ports CSI camera port for connecting a Raspberry Pi camera DSI display port for connecting a Raspberry Pi touchscreen display 4-pole stereo output and composite video port Micro SD port for loading your operating system and storing data 5V/2.5A DC power input Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Extra connectors for your EV3! Connect additional bricks, sensors and motors to your LEGO® MINDSTORMS® EV3 robotic creations! If you’ve added extra components to your original LEGO MINDSTORMS EV3 set, you’ll need these additional cables to connect them. Various lengths between 10 cm – 20 cm. 
whatsapp-color

Register for a Free Trial Class Now!

Login

Or

Sign Up

Or